|
Post by pbcrazy on Mar 9, 2008 21:22:35 GMT -5
ok i will try getting a new bolt, does the swamp sell new bolts there?
|
|
|
Post by pmr02 on Mar 9, 2008 21:34:16 GMT -5
probably not for that gun but you can ask if not there are a few websites you could probably get one from
|
|
slinky
Junior Member
Posts: 27
|
Post by slinky on Mar 13, 2008 12:38:09 GMT -5
google Alamocitypaintball.com
and get a Delrin "Low blow" bolt or a normal bolt it will cost you about 18 bucks
|
|
|
Post by pbcrazy on Mar 13, 2008 18:43:43 GMT -5
are u sure it will fit my gun??
|
|
slinky
Junior Member
Posts: 27
|
Post by slinky on Mar 13, 2008 20:23:41 GMT -5
as long as you buy the right one yeah
|
|
|
Post by devilhornedcoastie on Mar 17, 2008 18:03:01 GMT -5
Should I ditch my Flatline on my X-7 and get a J&J ceramic? 14 or 16 inch?
|
|
|
Post by keeprollin02 on Mar 17, 2008 19:04:43 GMT -5
Well if the flatline is working for you then keep it. From personal experience I have found that flatlines allow a lot of bounces and are very finicky on paint and high rates of fire. I have a JJ ceramic for one of my m98 customs and really like its accuracy and it quiets the guns report considerably. If you do get a barrel..stick with a 14 inch. 16+ doesnt increase accuracy and can actually hurt your gas efficiency. Not to mention the extra 2 inches of barrel to maneuver around bunkers.
|
|
|
Post by devilhornedcoastie on Mar 17, 2008 19:34:26 GMT -5
The flatline has been very (for lack of better terms) "hit and miss". Might be the cold weather the past few months, but I think I'm going to go with something different. JJ's aren't all that expensive anyway, so its not like I'll be out 150 bucks if it doesn't work.
|
|
slinky
Junior Member
Posts: 27
|
Post by slinky on Mar 17, 2008 21:33:25 GMT -5
i <3 apex
|
|
|
Post by pbcrazy on Mar 25, 2008 21:27:36 GMT -5
i have been having trouble finding a feed neck to fit a Jt excellerator 6.0, and i did not know if anyone knew of any that might fit. Also idea what kind of bolt i would get for it?
|
|
|
Post by penguin on Mar 26, 2008 10:12:47 GMT -5
I hate to refer people to other stores but see if bonus balls can order you one they have a jt account which the swamp is lacking but were working on that. If they don't have it then check around on action village and pbwholesalers. andif your getting the new bolt try to get an orange bolt or something with a softer hit point
|
|
|
Post by keeprollin02 on Mar 26, 2008 15:27:08 GMT -5
|
|
|
Post by pbcrazy on Mar 26, 2008 16:35:07 GMT -5
well thx i did not know they were selling for like $45 and i was thinking about jus not trying to upgrade and just get something like a pmr or maybe a A-5 for scenario.
|
|
|
Post by baller on Mar 26, 2008 16:37:19 GMT -5
so i just got a new hpa tank and i put it on my gun and then air started to come out of the barrel does anyone know why?
|
|
|
Post by keeprollin02 on Mar 26, 2008 17:13:20 GMT -5
what kind of gun do you have? odds are that your bolt is stuck forward for some reason.
pbcrazy- check out the FS section. I just put up a 98 and an A5 for sale.
|
|
|
Post by conceptballer on Mar 26, 2008 20:23:54 GMT -5
i have a JT and it just started doing it today, maybe i should replace the o-rings on the bolt (they are pretty old and dirty) but i dont know if that will do anything
|
|
slinky
Junior Member
Posts: 27
|
Post by slinky on Mar 26, 2008 22:39:12 GMT -5
striker O-rings maybe
|
|
|
Post by conceptballer on Mar 27, 2008 20:50:13 GMT -5
i replaced the o-rings on my bolt but it did not do anything. i am going to the swamp on sunday, is there anyone that can maybe take a look at my gun and see if they can see anything wrong with it?
|
|
slinky
Junior Member
Posts: 27
|
Post by slinky on Mar 30, 2008 0:54:05 GMT -5
ill bring one of the JTs i have and im sure we can get it taken care of
|
|
|
Post by penguin on Mar 30, 2008 19:20:16 GMT -5
well gentleman and ladies if we have any in here other than asher. I have realised my gear bag is getting rediclous. I had to purchase another cloth gun case to keep my babies from being scratched in my gear bag I am now up to markers and most of them are working the ones that are not need minimal work. I am considering options here I need a new project like a whole in the head but I aparantly need a hole in the head
|
|